Intellinet 156066 Manual do Utilizador descarregar pdf (Página 7)

SELECTING COMPUTERS USING HOT KEYS

You can directly change the DVI KVM Switch focus to any computer

using a simple keyboard command sequence: the Scroll Lock key and

the switch port number. Each computer is assigned a numeric ID.

1. To activate the Hot Key mode, press the SCROLL LOCK key twice

within two seconds. A beep will sound as conrmation.

2. Enter your desired switch port number (1-4). For example, if you press

SCROLL LOCK / SCROLL LOCK / 2, the computer on Port 2 will be

selected. You can also

use the Up or Down

arrow keys in lieu of a

number key to shift the

focus to the previous

(Up) or next (Down)

port.

NOTE: After switching

ports, there’s a delay of

1-2 seconds before the

video displays. This is

normal, and is due to the refresh rate of the video signal.

ADDITIONAL HOT KEY CONTROLS

Selecting USB Devices Connected to the 2-Port USB Hub

The DVI KVM Switch’s built-in two-port USB hub allows you to connect

additional shared peripherals on a “one-computer-at-a-time” basis. When

you connect a USB device to the switch, the device can be accessed

through any connected computer by using the hot key command sequence

SCROLL LOCK / SCROLL LOCK / Function Key, where F1 = PC1, F2 =

PC2, F3 = PC3 and F4 = PC4. For example, pressing SCROLL LOCK /

SCROLL LOCK / F2 switches USB hub access to the computer on Port 2.

Switching Computers But Not USB Device Access

You can change the switch’s focus without re-directing access to the

attached USB device(s). For example, you can print from one computer

Ho t Ke y Co m m a n d s

Switch to PC “X”

Switch to USB device only

Previous active PC

Next active PC

Auto Scan

Stop Auto Scan Any key

X = 1, 2, 3 or 4 Y = F1, F2, F3 or F4

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Intellinet 156066 Manual do Utilizador Página 7