6
providing control of as many as 256 KVM switches from a single control console. A cascade
conguration expands system ability and allows you to select computers connected to the
“master” (console-connected KVM switch) or a “slave” (any cascaded switch). Cascaded units
don’t need special conguration: After they’re connected, the KVM switches automatically
self-congure themselves as either master or slave.
1. Use 4-in-1 connection cables (like the one included with this Rackmount KVM Switch) to
connect one or more slave KVM switches to any PC port(s) of the master KVM switch.
NOTE: While the master console connections can be either USB or PS/2, all switch-to-
switch connections must be made using PS/2 connectors. CAUTION: As noted above, before
connecting to the KVM Switch, all computers and other system devices should be powered
off; otherwise, the switch system might not be properly set up.
2. Plug in the power adapter of the master KVM switch and connect the master to the
computer(s) or slave KVM switch(es).
3. Plug in the power adapter for each second-level slave KVM switch and connect the slave
to any additional (third-level) computers or KVM switches.
4. Plug in the power adapter for each third-level slave KVM switch (if any have been added).
5. Turn on any/all computers that are part of the system.
NOTE: The power-on sequence should be master KVM switch rst; then any second-level
slave KVM switch (connected to the master); then any third-level slave KVM switch (connected
to a second-level slave); then, nally, any computers connected either to the master or to one
of the slave switches.
Side Panel
Three holes on each side panel of the
Rackmount KVM Switch allow you to attach the
two included mounting brackets to the switch
chassis (using the included screws). Once both
brackets are securely attached, the switch can
be installed in a standard 19” rack cabinet.
OPERATION
Computers that are part of your KVM switch system can be selected/controlled three ways: by
using the push buttons on the from panel of the switch, through keyboard hotkey operation or by
on-screen display (OSD) selection.
Push Buttons
The front-panel buttons (1-8 for Model 524629, 1-16 for Model 524643) give you direct control
over KVM switch operation. Simply press a button to switch to its corresponding port, or
“channel.”
Hotkeys
A keyboard hotkey sequence consists of at least three specic keystrokes: <Scroll Lock> +
<Scroll Lock> + <command key(s)>, where the “command key(s)” can be designated from
among a number of options. NOTE: The two consecutive Scroll Lock keystrokes and the
subsequent command key(s) need to be pressed within two seconds of each other; otherwise,
the hotkey sequence won’t be validated. The following hotkey sequences can help make access
to — and control of — the system computers quicker and easier.
Power
(12 páginas)
(24 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais