Intellinet 560818 Guia de Instalação descarregar pdf (Página 2)

ENGLISH

This guide presents the basic steps to set up and operate this device.

For detailed instructions and speciﬁcations, refer to the user manual

enclosed with this product or at intellinet-network.com.

Placement

Prior to use, it is recommended that the switch be placed/positioned:

• onalevelsurfacethatcansupporttheweightoftheswitch(and

any other items that need to be considered);

• withaminimumof25mm(approx.1”)ofclearanceonthetopand

sides for adequate ventilation;

• awayfromsourcesofelectricalnoise:radios,transmitters,

broadband ampliﬁers, etc.;

• whereitcannotbeaectedbyexcessivemoisture.

The switch includes brackets and screws for optional rack mounting.

1. Disconnect any cables from the switch.

Position a bracket over the mounting holes on one side of the switch

and secure it in place with screws.

3. Repeat Step 2 on the other side of the switch.

4. Position the switch in the rack and screw the brackets to the rack.

5. Reconnect any cables.

Connections

•

All ports on the switch support Auto-MDI/MDI-X functionality, so

you can use straight or crossover UTP/STP cables to connect the

RJ45 ports to PCs, routers, hubs, other switches, etc.

• Usetheincludedpowercabletoconnectthereceptacleonthe

back of the switch to a power outlet, and conﬁrm that the Power

LED lights.

Web-ManagedGigabitEthernetSwitch•QuickInstallGuide English

LED Status Operation

Power On Unit is receiving power

Off Check connection

Link/ ACT On Valid port connection

Blinking Data transmitted/received

Off No link established

1 2 3 4 5 6 7 ... 15 16

Sem comentários

Intellinet 560818 Guia de Instalação Página 2