WIRELESS 802.11n PC CARD USER MANUAL MODEL 524070 INT-524070-UM-0208-01
desktop, then click “Launch Cong Utilities” in the pop-up menu (as shown above).2. The conguration utility will automatically scan for wireless
This shows the channel number used by the corresponding AP or wireless device. This shows the encryption method the AP or
4. If the selected WAP already has an SSID, proceed to the next step; otherwise, this prompt displays. Obtain the exact SSID of the wireles
Windows XP and Vista have a built-in wireless network conguration utility called Windows Zero Conguration (WZC),
3. Click “Network Connections” (below), then click “Connect to a network.” CONFIGURATION14
4. Right-click “Wireless Network Connection.” NOTE: This option may have a numerical sufx (as shown) if you have more than one wireless network c
6. If the access point is protected by encryption, enter its security key or passphrase here. It must match the encryption setting on t
If you need to connect to different wireless access points at different times — at home, the ofce or a cybercafe, for ex
3. On the Add Prole screen, set or re-set the parameters for the newly created/added prole. 18CONFIGURATION
Enter up to 32 alphanumerical characters and/or symbols (but no spaces). If available, the SSID of the selected WAP or ot
Select the authentication type of the WAP or other wireless device you wish to connect. If adding a prole from an exis
keys will be displayed as they’re entered, instead of asterisks. This enables 802.1x wireless authentication. Click “802.1x Sett
Enable/disable the function. NOTE: If unsure about this setting, ask your 802.1x authentication administr
and cannot be modied. If the authentication type selected is “EAP-FAST,” you can check this box t
The conguration utility provides information about network statistics and link status. If you want to know ho
3. To reset the statistics of all the displayed items back to zero, click “Reset Counter.”4. Click “OK” to close the window. 1. Right-cli
Displays the SSID and BSSID of the connected wireless access point or other wireless device (displayed as SSID <–> BSSID). If
2. Click the Advanced tab to display the advanced settings. Select from among “802.11 B/G mix,” “802.11 B only” and “802.11 B/G/N
will adjust the TCP window size automatically for better performance. NOTE: This should be safe for most wireless environments, but if da
oThis Wireless 802.11n PC Card provides a QoS (Quality of Service) function to improve the performance of certain network applications: aud
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless 802.11n PC Card, Model 524070.Connecting your notebook PC to a wireless network, t
Check to enable the WMM function. Click “Apply” (the upper of three such buttons) each time the box is checked/unchecked in orde
CONFIGURATION31WPS PIN code: Just input the code to the WAP, and the wireless access point and wireless card will do the rest. NOTE: This Wireless 802
4. Before establishing the wireless connection using WPS, you can click “Rescan” to search for WPS-enabled access points near you to make sure the
6. To disconnect the wireless adapter from a connected access point, click “Disconnect.” 7. To select another WPS-enabled wireless access point, cli
The PIN code of the Wireless 802.11n PC Card is an eight-digit number located on the right side of conguration utility screen. Record it for
Details of the Wireless 802.11n PC Card’s conguration utility and rmware versions and other important information can easily be accessed when a
SOFT APIn addition to acting as a wireless client of other wireless access points, the Wireless 802.11n PC Card can function as a wireless service pro
3. If your computer has another network card connected to the Internet, select it from the Name drop-down menu, then click “Enable ICS.” If your
Click to use the MAC address of the wireless PC card as the SSID. A prex of “AP” will be added. : Set the sec
Available options are “Open,” “Shared,” “WPA- PSK,” “WPA2-PSK” and “WPA-PSK / WPA2-PSK.” To disable wireless data encry
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and
If selecting “WEP” as the encryption type, enter the WEP encryption key: hex (numerals 0 – 9 and/or ASCII characters A – F)
Enter the MAC address of the wireless client you want to allow or reject here. NOTE: No colons (:) or hyphens (-) required. A
Displays the MAC address of this wireless client. The serial number of this wireless connection. Displays the
You can view operating details of the Soft AP mode on this screen. 1. Right-click the conguration utility icon, then click “Launch Cong
TROUBLESHOOTINGSome of the problems you may encounter during installation, conguration or operation are listed below with various possible solutions.
address of your card to their access point’s list.The network is slow or having problems when transferring large les. Move closer to the access
- 300 Mbps 40 MHz, 13 dBm +/- 1 dBm - 54 Mbps OFDM, 15 dBm +/- 1 dBm - 11 Mbps CCK, 18 dBm +/- 1 dBm• Receive sensitivity: - 300 Mbps 20 MHz
INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or
TABLE OF CONTENTSIn stallation ...6 Hardware ...
INSTALLATIONCAUTION: Before installing the card, discharge any static electricity from your body by touching any other metal obje
1. With the Wireless 802.11n PC Card inserted and the computer on, the Found New Hardware Wizard displays a welcome sc
4. The second Setup Type screen gives you two options. To enhance wireless performance (the data transfer rate, specically), you can
To close the conguration utility, click “Exit.” NOTE: Clicking “Exit” to stop the conguration utility prevents you from maintaining the wirele
Comentários a estes Manuais