
and cannot be modied.
If the authentication type
selected is “EAP-FAST,” you can check this box to use a protected
authentication credential.
Remove the credential you imported previously.
Click to be prompted to select an authentication credential le
from your computer.
Select the protocol of tunneled authentication here. This
pull-down menu is only available when the selected authentication
type is “PEAP” or “TTLS.” When “EAP-FAST” is selected, the protocol
setting is always “Generic Token Card” and cannot be changed.
Enter the identity of tunneled authentication here.
Enter the password of tunneled authentication here.
Select the password mode of the “EAP-FAST”
authentication mode. NOTE: This setting is hidden when the selected
authentication type is other than “EAP-FAST.”
2. After nishing with the settings, click “OK” to save the settings and exit.
1. Click the CA Server tab to display the Certication Authority settings.
Check this box to enable the use of a
certicate chain.
Select the issuer of the certicate from this drop-
down menu.
Check this box to allow intermediate
certicates.
Enter the name of the CA server here.
Check this box and the wireless
conguration utility will check if the server name of the CA server
you’ve entered is matched exactly with the CA server being connected
to. If they don’t match, the connection will be dropped.
Check this box and the
wireless conguration utility will check the end of the domain name.
If there’s anything wrong, the connection will be dropped.
2. After nishing with the settings, click “OK” to save the settings and exit.
CONFIGURATION
23
Comentários a estes Manuais